EC7-0808B
EtherCAT, Integrated I/O, 8DI, 8DO, PNP, 0.5A (plastic housing)
IP67 protection level, suitable for harsh industrial environments
Based on high-performance EtherCAT ASIC communication chips, direct control, faster speed
Using standard cable wiring is simple and the layout is quick
The configuration is simple, supporting mainstream EtherCAT masters
Compare
Interface Parameters
| Fieldbus Interface | 2 x M12, 4-pin, D-code, blue |
| Bus protocol | EtherCAT |
| Data transmission medium | UTP or STP of Category 5 or higher (STP recommended) |
| Transmission distance | <= 100 m (station-to-station distance) |
| Electrical Isolation | 500V |
Technical Parameters
| UL total current | Max：16A |
| UL current consumption | 25 mA + sensor supply current + load output current |
| Electrical isolation between GNDS and GNDL | Yes |
| Power Connector | 2 x M12, 5-pin, L-code, red |
| US total current | Max：16A |
| US current consumption | ≤35mA |
| Power Supply | 18~36VDC |
| Operating temperature | -25 ~ +70℃ |
| Protection rating | IP67 |
| Dimensions | 225×62×35.1mm |
| Relative Humidity | 95 %, no condensation |
| Storage Temperature | -40 ~ +85℃ |
| Weight | 480g |
Digital Input
| Input Interface | 8×M12，5Pin，A-code |
| Total Sensor Power Supply | Max：2A（from UL） |
| Rated voltage | 24 VDC(±25%) |
| Number of Signal Points | 8 |
| Signal Type | PNP |
| Input Current | 4mA |
| Isolation withstand voltage | 500V |
| Channel indicator | Green LED |
| "0" Signal Voltage | -3~+3 V |
| "1" Signal Voltage | 15~30 V |
| Isolation method | Optocoupler Isolation |
Digital Output
| Output Interface | 8×M12，5Pin，A-code |
| Total output current | Max：4 A（from UL） |
| Rated voltage | 24 VDC(±25%) |
| Number of Signal Points | 8 |
| Signal Type | PNP |
| Load Type | Resistive load, inductive load |
| Rated Current per Channel | Max：500 mA（from UL） |
| Port Protection | Overcurrent protection |
| Isolation withstand voltage | 500V |
| Isolation method | Optocoupler Isolation |
