XBF4-EC04

EtherCAT filedbus coupler module(Platform-Specific Edition Optimized for Beckhoff, Omron, and Keyence Systems)

Occupies fewer nodes, one coupler supports up to 32 slots and 1024 points

The filedbus coupler features four XBF expansion interfaces in RJ45 format, enabling daisy-chain connection of various types of I/O modules

The communication interface complies with communication standards, supporting mainstream EtherCAT master station

Featuring comprehensive indicator light design, module status is visible at a glance, thus simplifying inspection and maintenance

Compare

Interface Parameters

Protocol	EtherCAT
Max. Number of IO Modules	Subject to the number of slave devices supported by the master station
Data Transfer Medium	Ethernet/EtherCAT CAT5 S/FTP cable
Data Transfer Rates	100Mb/s
Distance Between Stations	≤50m (total accumulated length from interface of the coupler to the last I/O module on this branch; each interface supports expansion with up to 16 modules)
Bus Connection	2×RJ45
Minimum Cycle Time	250µs
Input and output process data volume	1020Bytes
Expansion Module Interface	4×RJ45
The maximum cascade number of coupler slave station	32
The maximum number of cascaded slaves for a single interface	16
Coupler expansion interface data transmission medium	Ethernet/EtherCAT CAT5 S/FTP cable
The maximum transmission distance between discrete I/O modules	30m

Weight	140g
Module Size	112.7×28×76mm
Protect. Class	IP20
Operating Temperature	-20℃~+60℃
Storage Temperature	-40℃~+80℃
Relative Humidity	95 %, no condensation
Input Voltage	SELV Input 24VDC（18V~36V）
Input Current	<0.95A
Module Abnormality Self-Recovery	Support
Access PDO through SDO	Support
Firmware Upgrade	Support
Power Supply Current	<500mA (max. supply current per interface); <750mA (combined maximum supply current for all four interfaces)
Power Supply Voltage	20VDC~24VDC
Drop Line Check	Support
Short circuit protection	Support
Anti-reverse protection	Support
Surge protection	Support