XBF4-EC04A

EtherCAT filedbus coupler module(General Version)

Occupies fewer nodes, one coupler supports up to 32 slots and 1024 points

The filedbus coupler features four XBF expansion interfaces in RJ45 format, enabling daisy-chain connection of various types of I/O modules

The communication interface complies with communication standards, supporting mainstream EtherCAT master station

Featuring comprehensive indicator light design, module status is visible at a glance, thus simplifying inspection and maintenance

Compare

Interface Parameters

Fieldbus Interface2×RJ45
Expansion Module Interface4×RJ45
Maximum number of Cascaded Slaves of the Coupler32
Maximum number of Cascaded Slaves per interface16
Data transmission medium of the Coupler expansion interfaceEthernet/EtherCAT CAT5 S/FTP cable
Maximum Transmission distance between discrete I/O modules30m
Minimum cycle time250µs
Input/Output Process Data Size1020Bytes
Number of I/O StationsDepends on the number of slaves supported by the master
Data transmission mediumEthernet/EtherCAT CAT5 S/FTP cable
Bus protocolEtherCAT
Transmission rate100Mb/s
Transmission distance<= 50 m (total distance from the coupler interface to the last I/O module on this branch; a single interface can extend up to 16 modules)

Technical Parameters

Input VoltageSELV Input 24VDC(18V~36V)
Input Current<0.95A
PDO access via SDOSupported
Supply Current< 500 mA (max. supply current per single interface) < 750 mA (max. total supply current across four interfaces)
Disconnection DetectionSupported
Short-circuit ProtectionSupported
Reverse Polarity ProtectionSupported
Surge protectionSupported
Supply voltage20VDC~24VDC
Module Fault Auto-RecoverySupported
Firmware UpgradeSupported
Operating temperature-20℃~+60℃
Relative Humidity95 %, non-condensing
Storage Temperature-40℃~+80℃
Protection ratingIP20
Dimensions112.7×28×76mm
Weight140g