EC4-PX02B
High speed digital output module with oversampling
Small in size, compact structure, only 102×72×25 mm
Supports two-channel oversampling high-speed output, channel-level synchronization function
PWM output frequency range is wide, duty cycle adjustment accuracy is high
Uses EtherCAT industrial Ethernet bus, compatible with mainstream EtherCAT masters
Compare
Interface Parameters
| Process Data Size: Output (Downstream) | 268 Bytes |
| Process Data Size: Input (Upstream) | 6 Bytes |
| Refresh rate | 1ms |
| Bus protocol | EtherCAT |
| Electrical Isolation | Yes |
Technical Parameters
| Operating temperature | -10℃~+60℃ |
| Protection rating | IP20 |
| Dimensions | 102×72×25mm |
| Relative Humidity | 95 %, non-condensing |
| Storage Temperature | -20℃~+75℃ |
| Weight | 130g |
Functional Parameters
| Oversampling High-Speed Output Toggle Frequency | 1MHz |
| Oversampling high-speed output data length | 1000 bits |
| Maximum output current | 1 A per channel |
| Channel short circuit protection | Supported |
| Channel overcurrent protection | Supported |
| Supply voltage | 24VDC |
| PWM output voltage | 20.4V~28.8V |
| PWM output duty cycle | 0%~100.0% |
| PWM output duty cycle adjustment accuracy | 0.1% |
| Maximum PWM output duty cycle error | ±0.1% |
| PWM output frequency | 0~20kHz |
| PWM output frequency adjustment accuracy | 1Hz |
| PWM output limit parameters | At 20 kHz, duty cycle range is 1.0 % ... 99.0 % (below 1 % is always low, above 99 % is always high) |
| Channel Overload Protection | Supported |
