PN4-GW2FP
PROFINET to 232/485/422 Free Port Protocol
Implement industrial Ethernet to 2-port serial output
Provide RS232/RS485/RS422 three-in-one interface
Support Freeport, protocol packet assembly, transparent transmission
Compare
Interface Parameters
| Connection Method | 2*RJ45 |
| Number of I/O Stations | According to master |
| Data transmission medium | Ethernet CAT5 Cable |
| Bus protocol | PROFINET |
| Transmission rate | 100Mb/s |
| Electrical Isolation | Yes |
Technical Parameters
| Rated current consumption | 47mA |
| Rated voltage | 24VDC(18~36V) |
| Operating temperature | -10~60℃ |
| Relative Humidity | 95 %, no condensation |
| Storage Temperature | -20~75℃ |
| Protection rating | IP20 |
| Dimensions | 102*72*25mm |
| Weight | 100g |
Functional Parameters
| Stop Bit | 1-bit, 2-bit |
| Serial Interface Type | RS485、RS232、RS422 |
| Supported modes | Master-slave mode, producer-consumer mode (not supported by RS485) |
| Number of exchange commands in master/slave mode | Supports up to 500 exchange commands |
| Number of exchange commands in producer/consumer mode | Supports up to 1000 exchange commands, with up to 2000 elements supported |
| Serial Port Parameters | Supported baud rates: 1200 bit/s, 2400 bit/s, 4800 bit/s, 9600 bit/s, 19200 bit/s, 35700 bit/s, 38400 bit/s, 57600 bit/s, 115200 bit/s. Other baud rates available on request. |
| Parity Mode | None, odd, even (no parity, odd parity, even parity) |
| Data Bits | 7. 8 bits |
