SW4-HUP08
100Mbps 8-Port Industrial Ethernet Switch
Supports full duplex or half duplex mode with automatic negotiation capability
Network port supports fully automatic cross identification
Built in storage and forwarding mechanism, supports multiple protocols
Meets industrial level operation standards, with an average time between failures of over 300000 hours
Compare
Interface Parameters
| Bus Connection | 8×RJ45 |
| RJ45 Port | 10/100BaseT (X) automatic detection, full/half duplex MDI/MDI-X adaptive |
Technical Parameters
| Weight | 640g |
| Module Size | 142.5×103.5×47.5mm |
| Protect. Class | IP40 |
| Operating Temperature | -40℃~+80℃（-40℉~176℉） |
| Storage Temperature | -40℃~+85℃（-40℉~185℉） |
| Relative Humidity | 5%~95%, no condensation |
| Installation method | DIN card rail type, wall mounted installation |
| Input Voltage | DC12~52V |
| Network Protocol | 10Base-T, IEEE 802.3 compliant; 100Base-TX and 100Base-FX, IEEE 802.3u compliant |
| Transmission Mode | store and forward |
| MAC address | 2K |
| Cache | 1Mbit |
| Backplane bandwidth | 1.6G |
| Exchange Delay | <10μs |
| Power consumption | ＜5W |
| Input terminal | Phoenix terminal |
| Dual power redundancy | support |
| Overcurrent protection | Support built-in overcurrent 4.0A protection |
| Reverse Protection | support |
| Casing | IP40 protection level, metal casing |
| Cooling method | Natural cooling, fanless |
| Mean Time Between Failures | 300000 hours |
| Warranty | 5 years |
