XB6-A20SG
2-channel bridge acquisition module, ±0.4‰ accuracy
Supports selection of bridge voltage
Supports selection of bridge connection method
Each channel supports disconnection detection
Can set standard range, extended range two modes
Compare
Interface Parameters
| Connection Method | Spring-Clamp contact |
| Process Data Size: Output (Downstream) | 4 Bytes |
| Process Data Size: Input (Upstream) | 12 Bytes |
| Transmission rate | 6Mb/s |
Technical Parameters
| Disconnection detection | Supported |
| Overflow/Underflow Function | Supported |
| Power Supply | 5 VDC |
| Operating temperature | -10℃~+60℃ |
| Relative Humidity | 95 %, non-condensing |
| Storage Temperature | -20℃~+75℃ |
| Protection rating | IP20 |
| Dimensions | 106×73×25.7 mm |
| Weight | 120g |
Functional Parameters
| Input Filter | Configurable |
| Channel indicator | Green LED |
| Number of channels | 2 |
| Sensor Type | Full bridge 4-wire/6-wire sensor, half bridge 3-wire/5-wire sensor |
| Connection Method | Full bridge 4-wire/6-wire, half bridge 3-wire/5-wire |
| Bridge Excitation Voltage | 2V /2.5V /3V /3.5V /4V /4.5V /5V |
| Conversion Rate | 5ms |
| Output Rate | 1ms |
| Input range | Full bridge: ±32 mV/V Half bridge: ±16 mV/V |
| Range Mode | Standard range mode, extended range mode |
| Accuracy Requirement | 0.4‰ |
| Channel Disable | Supported |
| Channel Independent | Supported |
| Zero point compensation | Half bridge zero point compensation (16-bit compensation) |
