XB6S-A08I
8-channel analog current output module, Single-ended signaling, adjustable range: Disable, 4mA~20mA, 0mA~20mA
Stronger anti-interference performance, applicable to more scenarios
Terminals distinguish between positive and negative power supply, preventing power leakage and reverse connection
High-speed X-bus backplane bus, output current type, adjustable range
Small footprint, fast speed, quick wiring, pluggable terminal blocks
Compare
Interface Parameters
| Data transmission medium | X-bus backplane bus |
| Bus connection method | Spring-Clamp contact |
| Transmission rate | 6Mb/s |
| Electrical Isolation | Yes |
Technical Parameters
| Rated current consumption | ≤100mA |
| Power Supply | 5VDC（4.5V~5.5V） |
| Module Fault Auto-Recovery | Supported |
| Diagnostics | Supported |
| alarm | Supported |
| Firmware Upgrade | Supported |
| Operating temperature | -20℃~+60℃ |
| Relative Humidity | 95 %, non-condensing |
| Storage Temperature | -40℃~+80℃ |
| Protection rating | IP20 |
| Dimensions | 106.4*25.7*72.3mm |
| Weight | 110g |
Analog
| Channel Response Time | 400µs / ch, 400µs / 8ch |
| Power consumption | 0.5W |
| Isolation withstand voltage | 500VAC |
| Number of Output Points | 8 |
| Signal Voltage/Current | 4 mA ... 20 mA, 0 mA ... 20 mA (Adjustable range, default 0 mA ... 20 mA) |
| Resolution | 16bits |
| Accuracy | ±0.1 % at 25 °C, ±0.3 % over full temperature range |
| Channel indicator | Green LED |
| Signal Type | Current type |
| Load Impedance | ≤500Ω |
