XB6S-A80
8-channel analog current&voltage input module
Superior Anti-interference Performance
Supports More Scenarios
Current & Voltage Compatibility
Clamping & Current Limiting Protection
High-speed X-bus Backplane
Single-ended Signal Input with Adjustable Range
Compare
Interface Parameters
| Data transmission medium | X-bus backplane bus |
| Bus connection method | Spring-Clamp contact |
| Transmission rate | 6Mb/s |
| Electrical Isolation | Yes |
Technical Parameters
| Rated current consumption | 100mA |
| Power Supply | 5VDC（4.5V~5.5V） |
| Module Fault Auto-Recovery | Supported |
| Diagnostics | Supported |
| alarm | Supported |
| Firmware Upgrade | Supported |
| Operating temperature | -20℃~+60℃ |
| Relative Humidity | 95 %, non-condensing |
| Storage Temperature | -40℃~+80℃ |
| Protection rating | IP20 |
| Dimensions | 106.4*25.7*72.3mm |
| Weight | 125g |
Analog
| Sampling Rate (All Channels) | ≤1ksps |
| Input Filter | Supported |
| Smoothing Level | 1~200 |
| Channel Response Time | 1ms / ch |
| Power consumption | 0.5W |
| Isolation withstand voltage | 500VDC |
| Input Points | 8 |
| Signal Voltage/Current | Disable, 0 mA ... 20 mA, 4 mA ... 20 mA, -10 V ... +10 V, 0 V ... 10 V, -5 V ... +5 V, 0 V ... 5 V, 1 V ... 5 V (adjustable range, default 4 mA ... 20 mA) |
| Resolution | 16bits |
| Accuracy | ±0.1 % at 25 °C, ±0.3 % over full temperature range |
| Input impedance | >= 100 kΩ (voltage) <= 100 Ω (current) |
| Channel indicator | Green LED |
| Signal Type | Single-ended signal |
