XB6S-A80I
8-channel analog current input module, Single-ended signaling, adjustable range: Disable, 4mA~20mA, 0mA~20mA
Stronger anti-interference performance, applicable to more scenarios
Maximum current input 30mA
High-speed x-bus backplane bus, single-ended signal input, adjustable range
Small footprint, fast speed, quick wiring, pluggable terminal blocks
Compare
Interface Parameters
| Data transmission medium | X-bus backplane bus |
| Bus connection method | Spring-Clamp contact |
| Transmission rate | 6Mb/s |
| Electrical Isolation | Yes |
Technical Parameters
| Rated current consumption | ≤110mA |
| Power Supply | 5VDC（4.5V~5.5V） |
| Module Fault Auto-Recovery | Supported |
| Diagnostics | Supported |
| alarm | Supported |
| Firmware Upgrade | Supported |
| Operating temperature | -20℃~+60℃ |
| Relative Humidity | 95 %, non-condensing |
| Storage Temperature | -40℃~+80℃ |
| Protection rating | IP20 |
| Dimensions | 106.4*25.7*72.3mm |
| Weight | 110g |
Analog
| Sampling Rate (All Channels) | ≤1ksps |
| Input Filter | 10 times (Filtering count adjustable) |
| Smoothing Level | 1~200 |
| Channel Response Time | 560µs / ch, 770µs / 8ch |
| Power consumption | 0.55W |
| Isolation withstand voltage | 500VAC |
| Input Points | 8 |
| Signal Voltage/Current | Disable, 4 mA ... 20 mA, 0 mA ... 20 mA (Adjustable range, default 0 mA ... 20 mA) |
| Resolution | 16bits |
| Accuracy | ±0.1 % at 25 °C, ±0.3 % over full temperature range |
| Input impedance | ≤100Ω |
| Channel indicator | Green LED |
| Signal Type | Current type (single-ended model) |
