EC7-0016B
EtherCAT all-in-one I/O, 16-channel digital output, PNP, 0.5A (plastic housing)
IP67 protection level, suitable for harsh industrial environments
Based on high-performance EtherCAT ASIC communication chips, direct control, faster speed
Using standard cable wiring is simple and the layout is quick
The configuration is simple, supporting mainstream EtherCAT masters
Compare
Interface Parameters
| Fieldbus Interface | 2 x M12, 4-pin, D-code, blue |
| Data transmission medium | UTP or STP of Category 5 or higher (STP recommended) |
| Bus protocol | EtherCAT |
| Transmission rate | 100Mb/s |
| Transmission distance | <= 100 m (station-to-station distance) |
| Electrical Isolation | 500V |
Technical Parameters
| Power Connector | 2 x M12, 5-pin, L-code, red |
| US total current | Max：16A |
| US current consumption | ≤35mA |
| UL total current | Max：16A |
| UL current consumption | 25 mA + sensor supply current + load output current |
| Electrical isolation between GNDS and GNDL | Yes |
| Power Supply | 18~36VDC |
| Operating temperature | -25 ~ +70℃ |
| Relative Humidity | 95 %, no condensation |
| Storage Temperature | -40 ~ +85℃ |
| Protection rating | IP67 |
| Dimensions | 225×62×35.1mm |
| Weight | 480g |
Digital Output
| Output Interface | 8×M12，5Pin，A-code |
| Total output current | Max：8 A（from UL） |
| Rated voltage | 24 VDC(±25%) |
| Number of Signal Points | 16 |
| Signal Type | PNP |
| Load Type | Resistive load, inductive load |
| Rated Current per Channel | Max：500 mA（from UL） |
| Port Protection | Overcurrent protection |
| Isolation withstand voltage | 500V |
| Channel indicator | Green LED |
| Isolation method | Optocoupler Isolation |
