High IP67 protection rating, suitable for harsh industrial environments
Based on IO-Link standard V1.1.3, enables remote control of IO-Link slave devices with convenient operation
Features 8 IO-Link ports, supporting connection of up to 8 IO-Link devices (Class-A type)
Pin2 (DO mode) and Pin4 (DO mode) feature short-circuit and overcurrent protection, with Pin2 supporting overcurrent recovery
| Fieldbus Interface | 2 x M12-D, 4-pin, female connector (socket) |
| Bus protocol | PROFINET |
| Data transmission medium | Category 5 or higher UTP/STP (STP recommended) |
| Transmission rate | 100 Mbps |
| Transmission distance | <= 100 m (station-to-station distance) |
| Electrical Isolation | 500 VAC |
| Power Connector | 2 x M12-L, 5-pin, male connector (pin) & female connector (socket) |
| US total current | Max.: 9 A |
| US current consumption | <= 100 mA |
| UA total current | Max.: 9 A |
| UA current consumption | 0 mA |
| Electrical isolation between US and UA | Yes |
| Power Supply | 24 V DC (18 ... 30 V) |
| Operating temperature | -25 ... +70 °C |
| Protection rating | IP67 |
| Dimensions | 225.5 x 62.5 x 32.6 mm |
| Relative Humidity | 95 %, non-condensing |
| Storage Temperature | -40 ... +85 °C |
| DI/DO/IO-Link interface | 8 x M12-A, 5-pin, female connector (socket) |
| Number of IO-Link channels | 8 |
| IO-Link Transmission Rate | COM1 (4.8 kbps), COM2 (38.4 kbps), COM3 (230.4 kbps) |
| Input signal type | PNP |
| Maximum number of output channels | Max. 16 |
| Maximum Output Current per Channel | Pin 4: 0.5 A pin 2: 2 A |
| Output Signal Type | PNP |
| Load Type | Resistive load, inductive load |
| Number of Input Channels | Max. 16 |
| Total output current | US, UA max. 9 A |
| Input Filter | Supported, fixed configuration of 3 ms |
| Port Protection | Overcurrent protection |
| Input Current | 200 mA |
| Isolation method | US and UA not isolated |
| Channel indicator | Supported |