SW4-GUP08D
1000Mbps 8-Port Industrial Ethernet Switch with BSP
Supports BSP
IP40 Protection Rating
Wide Voltage Input (DC 9~56V), Power Consumption ≤5W
Compliant with Industrial Standards, MTBF >300,000 Hours
Compare
Interface Parameters
| Fieldbus Interface | 8×RJ45 |
| RJ45 Port | 10/100/1000BaseT (X) auto-detection, full/half duplex MDI/MDI-X auto-adaptive |
Technical Parameters
| Input Voltage | DC9~56V |
| Installation method | DIN rail mounting, wall mounting |
| Network Protocol | IEEE802.3、IEEE802.3u、IEEE802.3ab |
| Transmission Mode | Store-and-forward |
| MAC address | 4K |
| Buffer | 1.5Mbit |
| Backplane bandwidth | 16G |
| Power consumption | ＜5W |
| Switching delay | ≤7μs |
| Input terminal | Phoenix Contact Terminal |
| Dual power supply redundancy | Supported |
| Overcurrent protection | Supports built-in 4.0 A overcurrent protection |
| Reverse connection protection | Supported |
| Housing | IP40 protection rating, metal housing |
| Cooling method | Natural cooling, fanless |
| Mean Time Between Failures (MTBF) | 300,000 hours |
| Warranty | 5 years |
| Operating temperature | -40℃~+80℃（-40℉~176℉） |
| Relative Humidity | 5 % ... 95 %, non-condensing |
| Storage Temperature | -40℃~+85℃（-40℉~185℉） |
| Protection rating | IP40 |
| Dimensions | 100×80×44mm |
| Weight | 320g |
