SW4-GUP08D-SFP2
Unmanaged Gigabit 10-Port Industrial Ethernet Switch, 8 Electrical (RJ45) + 2 SFP Fiber Ports
Supports 8x Gigabit RJ45 (electrical) ports and 2x Gigabit SFP fiber ports
Supports automatic DDM module rate detection for fiber (SFP) ports
IP40 protection rating
Supports DC 9~56V dual-power wide-voltage redundancy or AC 24V dual-power operation
Compare
Interface Parameters
| Fieldbus Interface | 8×RJ45，2×SFP |
| RJ45 Port | 10/100/1000Base-T(X) auto-negotiation, full/half duplex MDI/MDI-X auto-crossover |
Technical Parameters
| Input Voltage | Dual DC 9~56V or Dual AC 24V |
| Installation method | DIN Rail Mounting, Wall Mounting |
| Network Protocol | IEEE802.3、IEEE802.3u、IEEE802.3X、802.3z |
| Transmission Mode | Store-and-forward |
| MAC address | 8K |
| Buffer | 4.1Mbit |
| Backplane bandwidth | 24G |
| Power consumption | <5W |
| Switching delay | ≤7μs, supports up to 10K jumbo frame forwarding |
| Input terminal | Phoenix Contact Terminal |
| Dual power supply redundancy | Supported |
| Overcurrent protection | Supports built-in 4.0 A overcurrent protection |
| Reverse connection protection | Supported |
| Housing | IP40 protection level, metal casing |
| Cooling method | Natural cooling, fanless |
| Mean Time Between Failures (MTBF) | 300000 hours |
| Warranty | 5 years |
| Operating temperature | -40℃~+80℃（-40℉~176℉) |
| Relative Humidity | 5 % ... 95 %, non-condensing |
| Storage Temperature | -40℃~+85℃（-40℉~185℉) |
| Protection rating | IP40 |
| Dimensions | 100×80×44mm |
| Weight | 320g |
