SW4-HUP08C-POE
8-Port Fast Ethernet Non-Managed PoE Industrial Ethernet Switch
Supports full-duplex or half-duplex modes with auto-negotiation capability
IP40 protection rating
network ports feature auto MDI/MDIX
complies with industrial-grade operational standards with an MTBF exceeding 100,000 hours
Compare
Interface Parameters
| RJ45 Port | 10/100BaseT (X) auto detection, full/half duplex, MDI/MDI-X auto-adaptive |
| Fieldbus Interface | 8 x RJ45 |
Technical Parameters
| Input Voltage | DC 48 ... 57 V |
| Installation method | DIN rail mounting, wall mounting |
| Network Protocol | IEEE 802.3 10BASE-T; 100BASE-T IEEE 802.3i 10Base-T; IEEE 802.3u; IEEE 802.3x; IEEE 802.3af; IEEE 802.3at |
| POE standard | Output power: IEEE 802.3af max. power 15.4 W, IEEE 802.3at max. power 30 W, PoE port auto-detection af/at, PoE power pins: corresponding pins V+ (1, 2), V- (3, 6) |
| Transmission Mode | Store-and-forward |
| MAC address | 2K |
| Buffer | 768 kbit |
| Backplane bandwidth | 1.6G |
| Power consumption | < 3 W |
| Switching delay | <= 10 µs |
| Input terminal | Phoenix Contact Terminal |
| Dual power supply redundancy | Supported |
| Overcurrent protection | Supports built-in 4.0 A overcurrent protection |
| Reverse connection protection | Supported |
| Housing | IP40 protection rating, aluminum alloy housing |
| Cooling method | Natural cooling, fanless |
| Mean Time Between Failures (MTBF) | 100000 hours |
| Warranty | 3 years |
| Operating temperature | -40 ... +80 °C (-40 ... 176 °F) |
| Protection rating | IP40 |
| Dimensions | 140 x 103 x 34.6 mm |
| Relative Humidity | 5 % ... 95 %, non-condensing |
| Storage Temperature | -40 ... +85 °C (-40 ... 185 °F) |
| Weight | 250 g |
