SW4-GMSP8D-SFP2
Layer 2 Fully Managed Ring Network Gigabit 10-Port Industrial Ethernet Switch, 8 RJ45 + 2 SFP Fiber Ports, Supports STP/RSTP/ERPS, Supports Multicast IGMP Snooping/GMRP, SNMP V1/V2/V3, etc.
Supports 8 Gigabit Ethernet ports and 2 Gigabit SFP Fiber ports
Supports STP/RSTP/ERPS Ring network protocols, with ERPS self-healing time < 50 ms
Supports automatic identification of DDM Optical module rates on SFP Fiber ports
Supports Layer 2 Ethernet management, such as Ring network, VLAN, QoS, etc.
Compare
Interface Parameters
| Fieldbus Interface | 8×RJ45，2×SFP |
| RJ45 Port | 10/100/1000BaseT (X) automatic detection, full/half duplex MDI/MDI-X adaptive |
Technical Parameters
| Input Voltage | Dual DC 9~56V or Dual AC 24V |
| Installation method | DIN card rail type, wall mounted installation |
| Network Protocol | IEEE 802.3, IEEE 802.3u, IEEE 802.3ae, IEEE 802.3x, IEEE 802.3D, IEEE 802.3Q, IEEE 802.3P, etc. |
| Transmission Mode | Store-and-forward |
| MAC address | 8K |
| Buffer | 4Mbit |
| Backplane bandwidth | 40G |
| Power consumption | <10W |
| Switching delay | ≤7μs, supports up to 9K jumbo frame forwarding |
| Input terminal | Phoenix Contact Terminal |
| Dual power supply redundancy | Supported |
| Overcurrent protection | Supports built-in 4.0 A overcurrent protection |
| Reverse connection protection | Supported |
| Housing | IP40 protection rating, aluminum alloy enclosure |
| Cooling method | Natural cooling, fanless |
| Mean Time Between Failures (MTBF) | 300000 hours |
| Warranty | 5 years |
| Operating temperature | -40℃~+85℃（-40℉~185℉) |
| Relative Humidity | 5 % ... 95 %, non-condensing |
| Storage Temperature | -40℃~+85℃（-40℉~185℉） |
| Protection rating | IP40 |
| Dimensions | 138×108×49mm |
| Weight | 600g |
