SW4-GUP04D-SFP2
Unmanaged Gigabit 6-Port Industrial Ethernet Switch, 4 Electrical (RJ45) + 2 SFP Fiber Ports
Supports 4x Gigabit RJ45 (electrical) ports and 2x Gigabit SFP fiber ports
Supports automatic DDM module rate detection for fiber (SFP) ports
IP40 protection rating
Supports DC 9~56V dual-power wide-voltage redundancy or AC 24V dual-power operation
Compare
Interface Parameters
| Bus Connection | 4×RJ45，2×SFP |
| RJ45 Port | 10/100/1000Base-T(X) auto-negotiation, full/half duplex MDI/MDI-X auto-crossover |
Technical Parameters
| Input Voltage | Dual DC 9~56V or Dual AC 24V |
| Weight | 320g |
| Module Size | 100×80×44mm |
| Protect. Class | IP40 |
| Operating Temperature | -40℃~+80℃（-40℉~176℉) |
| Storage Temperature | -40℃~+85℃（-40℉~185℉) |
| Relative Humidity | 95 %, no condensation |
| Installation method | DIN card rail type, wall mounted installation |
| Network Protocol | IEEE802.3、IEEE802.3u、IEEE802.3X、802.3z |
| Transmission Mode | store and forward |
| MAC address | 8K |
| Cache | 4.1Mbit |
| Backplane bandwidth | 24G |
| Exchange Delay | ≤7μs, supports up to 10K jumbo frame forwarding |
| Power consumption | <5W |
| Input terminal | Phoenix terminal |
| Dual power redundancy | support |
| Overcurrent protection | Support built-in overcurrent 4.0A protection |
| Reverse Protection | support |
| Casing | IP40 protection level, metal casing |
| Cooling method | Natural cooling, fanless |
| Mean Time Between Failures | 300000 hours |
| Warranty | 5 years |
