SW4-GUP08C-POE
8-Port Gigabit Non-Managed PoE Industrial Ethernet Switch
Supports full-duplex or half-duplex modes with auto-negotiation capability
IP40 protection rating
network ports feature auto MDI/MDIX
complies with industrial-grade operational standards with an MTBF exceeding 100,000 hours
Compare
Interface Parameters
| Bus Connection | 8×RJ45 |
| RJ45 Port | 10/100/1000BaseT (X) automatic detection, full/half duplex MDI/MDI-X adaptive |
Technical Parameters
| Input Voltage | DC48~57V |
| Weight | 300g |
| Module Size | 140×103×34.6mm |
| Protect. Class | IP40 |
| Operating Temperature | -40℃~+80℃（-40℉~176℉） |
| Storage Temperature | -40℃~+85℃（-40℉~185℉） |
| Relative Humidity | 5%~95%, no condensation |
| Installation method | DIN card rail type, wall mounted installation |
| Network Protocol | IEEE802.3 10BASE-T；IEEE802.3i 10Base-T；IEEE802.3u；100Base-TX/FX； IEEE802.3ab 1000Base-T；IEEE802.3z 1000Base-X；IEEE802.3x； IEEE802.3af；IEEE802.3at |
| POE standard | Output Power: IEEE 802.3af maximum power 15.4 W IEEE 802.3at maximum power 30 W PoE port auto-detects IEEE 802.3af/802.3at standards PoE pin assignment: V+ (pins 1, 2), V- (pins 3, 6) |
| Transmission Mode | store and forward |
| MAC address | 4K |
| Cache | 1.5Mbit |
| Backplane bandwidth | 16G |
| Exchange Delay | ≤10μs |
| Power consumption | MAX:125W |
| Input terminal | Phoenix terminal |
| Dual power redundancy | support |
| Overcurrent protection | Support built-in overcurrent 4.0A protection |
| Reverse Protection | support |
| Casing | IP40 protection rating, aluminum plate/aluminum alloy enclosure |
| Cooling method | Natural cooling, fanless |
| Mean Time Between Failures | 100000 hours |
| Warranty | 3 years |
