SW4-HUP05C-POE
5-Port Fast Ethernet Non-Managed PoE Industrial Ethernet Switch
Supports full-duplex or half-duplex modes with auto-negotiation capability
IP40 protection rating
network ports feature auto MDI/MDIX
complies with industrial-grade operational standards with an MTBF exceeding 100,000 hours
Compare
Interface Parameters
| Fieldbus Interface | 5×RJ45 |
| RJ45 Port | 10/100BaseT (X) auto detection, full/half duplex MDI/MDI-X auto-adaptive |
Technical Parameters
| Input Voltage | DC48~57V |
| Installation method | DIN Rail Mounting, Wall Mounting |
| Network Protocol | IEEE802.3 10BASE-T；100BASE-T IEEE802.3i 10Base-T；IEEE802.3u； IEEE802.3x |
| POE standard | Output power: IEEE 802.3af max power 15.4 W, IEEE 802.3at max power 30 W, PoE port Auto-Detection af/at, PoE power pins: corresponding pins V+ (1, 2) V- (3, 6) |
| Transmission Mode | Store-and-forward |
| MAC address | 2K |
| Buffer | 768kbit |
| Backplane bandwidth | 1G |
| Power consumption | <123W |
| Switching delay | ≤10μs |
| Input terminal | Phoenix Contact Terminal |
| Dual power supply redundancy | Supported |
| Overcurrent protection | Supports built-in 4.0 A overcurrent protection |
| Reverse connection protection | Supported |
| Housing | IP40 protection rating, aluminum sheet metal Aluminum Alloy housing |
| Cooling method | Natural cooling, fanless |
| Mean Time Between Failures (MTBF) | 100000 hours |
| Warranty | 3 years |
| Operating temperature | -40℃~+80℃（-40℉~176℉） |
| Relative Humidity | 5 % ... 95 %, non-condensing |
| Storage Temperature | -40℃~+85℃（-40℉~185℉） |
| Protection rating | IP40 |
| Dimensions | 117×73×29.6mm |
| Weight | 250g |
