SW4-HUP16D
100Mbps 16-Port Industrial Ethernet Switch with BSP
Supports broadcast storm suppression function
Alarm contact: Relay output, supports one normally open (NO) and one normally closed (NC) circuit with 1A @ DC24V
Supports DC9～56V wide voltage power supply, overall power consumption ≤8W
Complies with industrial-grade operational standards, with an average MTBF (Mean Time Between Failures) of over 300,000 hours
Compare
Interface Parameters
| Fieldbus Interface | 16×RJ45 |
| RJ45 Port | 10/100BaseT (X) auto-detection, full/half duplex MDI/MDI-X auto-adaptive |
Technical Parameters
| Input Voltage | DC9~56V |
| Installation method | DIN Rail Mounting, Wall Mounting |
| Network Protocol | IEEE802.3、IEEE802.3u、IEEE802.3x |
| Transmission Mode | Store-and-forward |
| MAC address | 8K |
| Buffer | 4.1Mbit |
| Backplane bandwidth | 3.2G |
| Power consumption | ＜8W |
| Switching delay | ≤7μs |
| Input terminal | Phoenix Contact Terminal |
| Dual power supply redundancy | Supported |
| Overcurrent protection | Supports built-in 4.0 A overcurrent protection |
| Reverse connection protection | Supported |
| Housing | IP40 protection rating, thickened aluminum alloy |
| Cooling method | Natural cooling, fanless |
| Mean Time Between Failures (MTBF) | 300000 hours |
| Warranty | 5 years |
| Operating temperature | -40℃~+80℃（-40℉~176℉） |
| Relative Humidity | 5 % ... 95 %, non-condensing |
| Storage Temperature | -40℃~+85℃（-40℉~185℉） |
| Protection rating | IP40 |
| Dimensions | 154x127x54mm |
| Weight | 1000g |
