SW4-TSNGS6-SFP2
TSN-dedicated Gigabit 8-port industrial Ethernet switch, 6 electrical ports, 2 SFP Fiber ports
TSN-dedicated chip ensures stable operation of the switch's high-capacity data exchange
Supports Layer 2 protocols such as VLAN, GVRP, MAC, QoS and Multicast
Supports Ring Redundancy Protocols such as RSTP, MSTP, ERPS and MRP
Supports TSN Protocols such as Qbv, Qbu, Qci and Qcb
Compare
Interface Parameters
| Fieldbus Interface | 8 x RJ45, 2 x SFP |
| RJ45 Port | 10/100/1000BaseT (X) auto detection, full/half duplex MDI/MDI-X auto-sensing |
Technical Parameters
| Operating temperature | -40 ... +85 °C (-40 ... 185 °F) |
| Storage Temperature | -40 ... +85 °C (-40 ... 185 °F) |
| Network Protocol | IEEE802.1D, 802.1p, 802.1Q, 802.1s, 802.1w, 802.3ab, 802.3ad, 802.3x, 802.3z, 802.3az, 802.3ae, G.8032, 802.1AS, 802.1Qbv, 802.1Qbu, 802.1Qci, 802.1Qcb, 802.1Qcc |
| Transmission Mode | Store-and-forward |
| MAC address | 21K |
| Buffer | 32 Mbit |
| Backplane bandwidth | 128G |
| Switching delay | <= 5 µs, jumbo frame forwarding up to 14792 Bytes |
| Power consumption | < 10 W |
| Input Voltage | Dual-input DC 9 ... 56 V |
| Input terminal | Phoenix Contact Terminal |
| Dual power supply redundancy | Supported |
| Overcurrent protection | Supports built-in 4.0 A overcurrent protection |
| Reverse connection protection | Supported |
| Housing | Aluminum Alloy Housing |
| Installation method | DIN rail mounting, wall mounting |
| Cooling method | Natural cooling, fanless |
| Weight | 600 g |
| Dimensions | 138 x 107 x 53 mm |
| Protection rating | IP40 |
| Mean Time Between Failures (MTBF) | 300000 hours |
