XB6S-A40TM
4-channel thermal resistance and thermocouple temperature acquisition module
Measurement types support TC, TD, RTD
Sensitivity: 0.1℃, supports single-channel filter settings
Temperature sensor supports disconnection detection
Supports 50Hz, 60Hz, 10Hz, noise suppression configuration
Compare
Interface Parameters
| Data transmission medium | X-bus backplane bus |
| Bus connection method | Spring-Clamp contact |
| Transmission rate | 6Mb/s |
| Electrical Isolation | Yes |
Technical Parameters
| Power Supply | 5VDC（4.5V~5.5V） |
| Module Fault Auto-Recovery | Supported |
| Diagnostics | Supported |
| alarm | Supported |
| Firmware Upgrade | Supported |
| Operating temperature | -20℃~+60℃ |
| Relative Humidity | 95 %, non-condensing |
| Storage Temperature | -40℃~+80℃ |
| Protection rating | IP20 |
| Dimensions | 106.4*25.7*72.3mm |
| Weight | 110g |
Analog
| Input Filter | Single-channel Filtering, configurable (levels 1 to 10) |
| Power consumption | 0.5W |
| Sensor Type | thermocouple, RTD, resistance |
| Conversion Time | Thermocouple: 29 ms/ch, 115 ms/8 ch RTD, resistance: 73 ms/ch, 290 ms/8 ch |
| Sensitivity | thermocouple, RTD: 0.1 °C Resistance: ±0.1 Ω |
| Noise Suppression | 50 Hz, 60 Hz, 10 Hz, no noise suppression |
| Excitation Current | <2mA |
| Isolation withstand voltage | 500VAC |
| Input Points | 4 |
| Resolution | 16 bit (int type) |
| Accuracy | Thermocouple: ±0.3 % @25 °C (F.S.), ±0.5 % @-20 ... 60 °C (F.S.) RTD: ±0.1 % @25 °C (F.S.), ±0.3 % @-20 ... 55 °C (F.S.) Resistance: ±0.1 % @25 °C (F.S.), ±0.3 % @-20 ... 55 °C (F.S.) |
| Input impedance | ≥10KΩ |
| Channel indicator | Green LED |
