Solidot C3 Series Discrete Valve Terminal Selection Guide

The Solidot C3 Series Discrete Valve Terminal, renowned for its excellent ease of use and high performance, is widely applied across industrial automation fields. It serves various industries including food & medical, 3C electronics, photovoltaic, semiconductor, lithium battery & hydrogen energy, and automotive manufacturing. To address common questions during the selection process, this article provides a detailed guide to its configuration procedure, helping users complete setups accurately and efficiently. The specific steps are as follows:

1.Visit the Solidot official website (https://www.solidotech.com). Then, follow the sequence shown in the diagram below to navigate to the C3 Series Discrete Valve Terminal selection page.

2.Determine the number of solenoid valve positions based on actual application requirements. We will use an 8-position valve terminal as an example.

3.Select the solenoid valve width.

4.Choose the pilot operation method according to working condition requirements. Generally, internal pilot is sufficient. If there is a special requirement for low-pressure start-up, external pilot can be selected. The specific selection interface and the differences between the two methods are as follows.

5.Perform solenoid valve selection in the yellow-highlighted area. Hold the Shift key to select multiple valve positions, and click the target solenoid valve to assign it. To reserve an empty position, select "N (Empty Position)."

Taking the following 8-position valve terminal as an example: Configure 3 single solenoid valves, 4 double solenoid valves, and reserve 1 empty position.

6.Select the valve terminal's inlet pipe diameter, inlet port position, exhaust port position, and the outlet pipe diameter for the solenoid valve connectors in sequence.

7.If multiple pressure sources are required on-site, enable the pressure zoning function. If not needed, keep the default setting as "None."

8.After completing all the above configurations, click "Generate Discrete Valve Terminal Model." The system will automatically generate the corresponding complete valve terminal model number.

At this point, the selection process is complete.

The above is the detailed selection guide for the Solidot C3 Series Discrete Valve Terminal. Thank you for reading.