Introduction of EI3 series of integrated IO modules from Solidot Technology

The Point Technology Integrated I/O Module EI3 series adopts an Industrial Ethernet Bus Interface and is an EtherNet/IP Slave device with a standard I/O architecture, compatible with EtherNet/IP networks from multiple vendors. It is widely used in the panel and 3C industries. Its horizontal design has a height of only 35 mm, making it suitable for installation in compact-depth locations.

Point Technology Integrated I/O Module EI3 series representative modelEI3-0032A

This series includes multiple products; refer to the table below for model selection.

The Point Technology Integrated I/O Module EI3 series features input compatibility, with digital input signals compatible with both NPN and PNP. It uses a 100 Mbps industrial Ethernet port for faster speed, simple configuration, and supports mainstream EtherNet/IP masters.

The innovative Channel indicator design is placed close to each channel, so the channel status is clearly visible at a glance, making inspection and maintenance more convenient.

The module consists of a Terminal Dust Cover, Rotary switch, system label & Indicator, Module Label, DIN Rail Mounting Slot, Fieldbus Interface, Channel Type Marking, Channel indicator & label, Terminal blocks, and Latch.

The Rotary switch provides a convenient way to Set IP Address, as shown in the figure below:

It is suitable for mounting on a DIN 35 mm Rail and uses Screw Terminal blocks for stable and quick wiring.

This concludes the introduction to the Point Technology Integrated I/O Module EI3 series. Thank you for watching.